Lighting

Art | Bicycling | Food | Hacks | Making Stuff | Music | Wirehead
Home | Mail | Search
WireWorld > Bicycling > Bikes and Hardware > Lighting

Competitive cyclists don't always think about this. But one of the biggest and most important things about riding as a form of transportation is being seen and being able to see other people... and lighting helps. This is largely an American problem, mind you, because we think bikes are either toys or for racing and forget that we don't actually need to drive. But lights are important for people who bike like me.

Now, I know what parts cost, largely because I play with this sort of stuff for my art. And when I look at the stuff in the stores, I realize that I'm paying a fairly huge markup. Because what you are getting is about the same level of sophistication that a waterproof flashlight has, with some customized bits and bobs so it'll mount. We're talking several times the cost of parts when you get done. This is absurd. And they don't even do a very good job at it most of the time.

In my opinion, we're not yet at the point where a person can have too much bike lighting. Light does two things for you. First, your front light lets you see what's in front of you. Second, front and back lights make you visible to other people on the road. I suspect that there are even some advantages to having a blinky light in front and back during the day.

The way things used to be, you'd have either a battery that went in one of the waterbottle cages or a generator on the bike. And it would power a few watts of incandescent light. And it would be expensive. Then LEDs got decent, so you could get a decent light in a small package.

The base technology is pretty much there. However, even though the technology is there, most bike lights suck, cost a lot of money, or both. What I'm seeing the most is that corners are cut in the wrong places. So the battery clip fails. Or the button comes off. Or it's not quite watertight. Or the driver circuit is poorly designed, so even though it's got a 1W Luxeon LED, it's actually fairly dim. Or the lens puts all of the light in a little spot in the center so it fries your retina over easy if you look directly at it but doesn't distribute the light much outside of that tiny spot, thus making it useless for navigating at night or being seen.

So between poor lens design and poor driving circuitry, even if you have a state-of-the-art super-bright LED, you can have an astonishingly dim light that isn't reliable. I've been let down often enough by lights that I tend to think it's better to carry a backup. So I have two lights in front and if I could get one of the lights that is both a reflector and a light and white for going in front, I'd have a third front light, just like I've got a third back light.

Ascent Jet Set Headlight/Taillight Combo 2009-03-10 01:10PM
Incredibly flimsy. I had it for a few days before I took it back.
Some thoughts about blinky patterns 2009-03-10 01:09PM
Given that the most important role of a light is to be seen by others on the road and how short your batteries last for especially bright lights, blinking is a fairly natural feature to add to lights. By making the light blink, you make the light much more conspicuous and allow a very powerful light to be seen from a much longer distance than a less powerful light that is on constantly.
Cateye HL-EL320 2009-03-10 01:15PM
This is the low end of the Cateye lineup, but it's pretty bright.
Cateye TL-LD500 2010-07-25 04:35PM
One of the few lights that will mount on a back rack... or at least mount on my back rack...
NightRider CherryBomb 2010-07-25 04:50PM
The PlanetBike SuperFlash is the gold standard of blinkie rear lights. I liked mine just fine, but I also had my Cateye reflector-light break and wanted to try the PlanetBike alternative. And my general rule is that I don't like to have two lights from the same brand backing each other up.
ViewPoint FlashPoint High Intensity Taillight 2009-03-10 01:13PM
I got it because it was bright and because it had an integral CSPC reflector... something I wish more light makers would do, given that the law requires both reflector and light, even though reflectors aren't nearly as useful as people would think. But....
A brief tour of the innards of a bike light 2009-03-10 01:06PM
The two components that are painfully obvious about a light are the LED and the battery. However, there's much more...
Cateye TL-LD150-R 2010-07-25 05:08PM
This is a vaguely reasonably priced red LED safety light. I'm somewhat obsessive about having lights at night and wanted to try a few ways to mount extras, and it's reasonably priced for a 5 LED light. On the other hand, I think that, like most bike lights, it's fairly overpriced. But if you want something that's weather-sealed and doesn't require hand-assembly, this is how you have to do things.
Light Mountings 2009-03-10 01:01PM
I've experienced plenty of situations where having more than one light has come in handy. The problem is, there's only so many places where a person can mount lights on a bike and there aren't enough people riding at night to make light mounting points a way to distinguish one bike from another.

I'm fairly picky about mounting. The cheapest lights don't always mount well and people who try to install lights don't always read the manual. The problem is that it needs to be able to clamp to a variety of different sizes of posts and there's not standardized mounts for things nor standardized handlebar sizes nor anything else.
Is your one-watt light really a one-watt light? 2009-03-10 01:08PM
I started getting curious about this. See, rating lights by how many watts is pretty popular these days and I was wondering exactly how much lie is included in those numbers.
PlanetBike Blinky 7 2009-03-10 01:14PM
Kind of like a cheaper version of the PlanetBike SuperFlash
PlanetBike One Watt Blaze 2009-03-10 01:17PM
A fairly bright front light from PlanetBike
PlanetBike SuperFlash 2010-04-09 12:08PM
This is the gold standard of blinkie rear lights.
Power for bike lights 2009-03-10 01:04PM
Some brief thoughts about how to power bike lights
PlanetBike Rack Blinky 2010-07-25 04:33PM
One of the few lights that will mount on a back rack... or at least mount on my back rack. There's a little plastic bracket that the light slides into and it's the same size and shape as most of PlanetBike's other lights.
Why does California require a front light but just a rear reflector? 2010-07-25 04:30PM
If you check the California vehicular code, they require a front light that's bright enough to meet a particular specification. The code is silent about a rear light, just requiring a reflector in back.
What about reflectors? 2010-04-09 11:47AM
There are plenty of exciting articles out there about reflectors. People will cover themselves with all sorts of funky reflector materials, just in case.
Planet Bike Spok 2010-07-25 04:31PM
I would not feel comfortable with having one of these as my only be-seen light. It's a tiny light for use as a backup, for side visibility, or extra conspicuity. On the other hand, they do mount nicely around all sorts of irregular places. Like fork crowns or seat posts.
Princeton Tec Swerve 2010-07-25 04:54PM
Two half-watt rear-facing LEDs in one package...
ViewPoint Lazer 2009-03-10 01:12PM
Flimsy and unimpressive
Copyright 2007, Ken Wronkiewicz
Version 4.0
Last Updated: 2010-07-25 05:08PM
Posted: 2008-11-11 10:55AM